Supermicro SSG-6049P-E1CR24L

Kód: 202.151996
Part Number: SSG-6049P-E1CR24L
Výrobce: Supermicro
Dostupnost: Do týdne
Externí sklad: 20 - 50 ks
Záruka: 24 Měsíců
Recyklační poplatek: 12,00 Kč (bez DPH)
Cena bez DPH: 54 755 Kč
Cena s DPH: 66 254 Kč
celková cena je včetně autorského a recyklačního poplatku
kusy
 
 
 
 
1. Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, 3 UPI up to 10.4GT/s 2. Up to 2TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 16 DIMM slots 3. 3 PCI-E 3.0 x16, 4 PCI-E 3.0 x8 (slot 2 & 3 occupied by controller and JBOD expansion port) 4. 24 Hot-swap 3.5" SAS3/SATA3 direct attached drive bays 5. Broadcom 3008 SAS3 AOC 6. 2x 10GBase-T LAN ports with Intel X722 + PHY Intel X557 7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN 8. 3 Hot-swap 8cm redundant PWM cooling fans, 2 hot-swap 8cm rear exhaust PWM fans PWM fans 9. 1200W Redundant Power Supplies Titanium Level (96%)
Product SKUs
SSG-6049P-E1CR24L
  • SuperServer 6049P-E1CR24L (Black)
 
Motherboard

Super X11DPH-T
 
Processor/Cache
CPU
  • Dual Socket P (LGA 3647)
  • Intel® Xeon® Scalable Processors,
    3 UPI up to 10.4GT/s
  • Support CPU TDP 70-205W
Cores
  • Up to 28 Cores with Intel® HT Technology
 
System Memory
Memory Capacity
  • 16 DIMM slots
  • Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM, DDR4 up to 2666MHz
Memory Type
  • 2666/2400/2133MHz ECC DDR4 SDRAM
 
On-Board Devices
Chipset
  • Intel® C624 chipset
SAS
  • SAS3 (12Gbps) via Broadcom 3008 AOC
  • Broadcom 3008 controller
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Controllers
  • Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • ASPEED AST2500 BMC
 
Input / Output
LAN
  • 2 RJ45 10GBase-T LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 4 USB 3.0 ports (rear)
  • 1 Type A
VGA
  • 1 VGA port
Serial Port / Header
  • 1 Fast UART 16550 port / 1 Header
 
System BIOS
BIOS Type
  • 256Mb AMI UEFI
 
Management
Software
  • Intel® Node Manager
  • IPMI 2.0
  • NMI
  • SPM, SUM
  • SuperDoctor® 5
  • Watchdog
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-846BE1C-R1K23B
 
Dimensions
Width
  • 17.2" (437mm)
Height
  • 7" (178mm)
Depth
  • 26.5" (673mm)
Weight
  • Gross Weight: 92 lbs (41.7 kg)
  • Net Weight: 55 lbs (24.9 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • Network activity LEDs
  • System Overheat LED
  • Power fail LED
 
Expansion Slots
PCI-Express
  • 3 PCI-E 3.0 x16 slot
  • 4 PCI-E 3.0 x8 slots
  • Slot 2 & 3 occupied by controller and JBOD Expansion Port
 
Drive Bays
Hot-swap
  • 24 Hot-swap 3.5" SAS3/SATA3 drive bays
Optional
  • 2 Optional Onboard NVMe M.2
 
Backplane
SAS3/SATA3 single expander per backplane
 
System Cooling
Fans
  • 3 Hot-swap 8cm redundant PWM cooling fans
  • 2 Hot-swap 8cm rear exhaust PWM fans
  • Redundant cooling
 
Power Supply (76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power
  • 1000W/1200W
Dimension
(W x H x L)
  • 76 x 40 x 336 mm
Input
  • 100-127Vac / 15-12A / 50-60Hz
  • 200-240Vac / 8.5-7A / 50-60Hz
+12V
  • Max: 83A / Min: 0A (100-127Vac)
  • Max: 100A / Min: 0A (200-240Vac)
+5Vsb
  • Max: 4A / Min: 0A
Output Type
  • 19 Pairs Gold Finger Connector
Certification Platinum Level Certified95%+
 UL/cUL/CB/BSMI/CE/CCC
Titanium Level
  Test Report ]
 
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 
       10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature: 
       -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity: 
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 
       5% to 95% (non-condensing)
 
Parts List - (Items Included)
 
Part Number
Qty
Description
Motherboard / Chassis MBD-X11DPH-T 
 
CSE-846BE1C-R1K23B
1
 
1
Super X11DPH-T Motherboard
 
4U Chassis
Add-on Card / Module AOM-SAS3-8I8E 1 8-port Mini SAS HD Int-to-Ext cable adapter w/FH bracket,HF,RoHS/REACH
Backplane BPN-SAS3-846EL1 1 24-port 4U SAS3 12Gbps single-expander backplane, support up to 24x 3.5-inch SAS3/SATA3 HDD/SSD
Cable 1 CBL-0099 1 Power extension cable; one HDD to two HDD and two FDD. 35/25/12cm. 22AWG
Cable 2 CBL-0296L 3 4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG
Cable 3 CBL-PWEX-0645 2 big 4 pin male to big 4 pin female, power extension 15cm, 20AWG,RoHS/REACH
Cable 4 CBL-SAST-0531-01 4 MINI SAS HD,12G,INT,80CM,30AWG
Parts MCP-220-84606-0N 1 Rear dual 2.5 hot swap HDD kit for SC846B
Parts MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.
Heatsink / Retention SNK-P0068PS 2 2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism
Power Supply PWS-1K23A-1R 2 AC-DC 1200W, Titanium Level, Redundancy, 1U, PMBUS 1.2, +12V/+5Vsb, 360x76x40 mm,HF,RoHS/REACH
FAN 1 FAN-0125L4 2 80x32 mm 6.7K RPM SC836 Rear Exhaust Fan w/ Housing
FAN 2 FAN-0185L4 3 80x80x38 mm, 10.5K RPM, Hot-swappable Middle Cooling Fan for X11 Generation SC846B Chassis